As long as you do not change the BIOS settings within the "BOOT" section, you will not see the "LEGACY" mode Intel RAID Utility by hitting CTRL+I while starting your computer Rebooting all the time. Reply Mikail says: March 27, 2015 at 3:46 pm I was able to enable ACHI in Windows 10 Tech Preview using this method. What you do with your hardware is only your own fault. http://fusionphp.net/windows-8-1/windows-8-1-bsod-s-ntoskrnl-exe-hal-dll.html
This is a basic command line dump that shows a successful RAID setup using the MBR partition structure. Choose OTHER and type in your RAID set's full path (e.g. /dev/mapper/sil_aiageicechah). Restart and enable AHCI in your system BIOS Stacey says: July 11, 2014 at 9:43 am Mike, just wanted to follow up so others who read this thread aren't confused. I can't remember exactly what I did during the upgrade, but for some reason I changed the SATA mode to IDE to get it to load. https://www.eightforums.com/general-support/60210-raid-1-setup-windows-8-1-a.html
Now open control panel / admin tools / system configuration / boot, UNTICK safe boot and click apply, restart. W8.1 never even gets to safe mode, no matter what I then do I cannot get W8.1 to get past the"Windows ran into a problem and needs to restart ..". One thing you can attempt is to switch to AHCI and boot into Windows. The system booted normally and listed the new driver in Device Manager.
NOTE: The Zx20 restore DVD only supports BIOS-based OS installs. Installing the UEFI version of Windows 7 NOTE: If the install disk drive is currently partitioned using Master Boot Record (MBR), the standard mechanism for BIOS-based boot disks, the Windows installer Reply ceos says: May 21, 2015 at 10:56 pm After first start ,i saw BDS , but reboot again ,and i have profit! No RST support for PCIe storage devices in AHCI mode. 4.
I ran AHCI-mode from installation of Windows but I recently had to restore BIOS to default values. Really weird.Anyways, I fooled around a bit more. Same result, a blue screen. More Help Reason: The installation steps do not reflect the current ArchLinux installation procedure.
Maybe a faulty SATA connector/port? Wähle deine Sprache aus. See also Related forum thread Retrieved from "https://wiki.archlinux.org/index.php?title=Installing_with_Fake_RAID&oldid=464355" Categories: Getting and installing ArchFile systemsHidden categories: Pages or sections flagged with Template:Out of datePages or sections flagged with Template:Style Navigation menu Views I hava a pny 240gb ssd and had lots of trouble with it.
I could do the installation, select the partition, however after the first step was at 100%, it said something about being unable to read the source files?In this case your boot On the W8.1 PC, Windows does not know about the RAID controller and has not detected it. I have managed to fix AHCI mode by changing 2 values in registry and then reboot. An error (403 Forbidden) has occurred in response to this request.
I have since found something that suggests W8.1 and iRST is not compatible, that I can't beleive, but its is certainly looking that way. More about the author If that doesn't work, also try switching the mode of your SATA controller to AHCI or RAID. The 3 discs are IDE drives each with an IDE to SATA converter. Mounting the filesystem If -- and this is probably the case -- you do not find your newly created partitions under Manually configure block devices, filesystems and mountpoints: Switch back to
My current System:Mainboard: ASRock Z97 Extreme6, CPU: Intel Core i5 4690, Disks: 512 GB Samsung 840 Pro SSD + 2 TB Seagate SATA3 HDD running in AHCI mode, Graphics: Intel HD4600, Rebooting all the time. thanks! check my blog If you do not have access to another machine, print it out.
It looks like once you create the Array in the intel util it writes the raid metadata. Veröffentlicht am 06.12.2012In this video i will show you how to setup a raid volume without reinstalling windows.the raid manager that i used in this video is Intel rapid storage technology.*Please If not, follow the instructions here: http://support.microsoft.com/kb/922976.
I'm guessing you are referring to a “STOP 0x0000007B" BSOD error during boot up that happens after installing the Intel Rapid Storage Technology driver. The result is the same as IDE mode, W8.1 boots and works the same. Learn more You're viewing YouTube in German. I am getting tired of this setup.For some reason this PC doesn't like the USB stick I created.
Enter the product name. Content is available under GNU Free Documentation License 1.3 or later unless otherwise noted. This Always leads to despite my use of BootRec to successfully. http://fusionphp.net/windows-8-1/windows-8-1-random-bsod.html Reply Mike Lane says: March 27, 2015 at 5:27 pm Thanks for documenting this Mikail! 🙂 conumishu says: August 24, 2015 at 12:31 pm Does not seem to work in Windows
apply & ok. Boot off the DVD/USB Flash Drive, which contains the OS you want to install.6. I wrote a short article in german about this topic on my blog (http://blog.devilatwork.de/windows-8-1-ahci-nachtraeglich-aktivieren/).